Typical electrical installation Seat Ibiza HB 2017/06-, 7pin, AC
- 10 %
Product Description
Typical 7-pin electrical set of the manufacturer AC / trail-tec with an unbeatable price and perfect reliability.
Standard electrical connections are normally plugged into pre-prepared connectors on the vehicle and, after coding, communicate with the vehicle's electronic systems. Whether the connection communicates via the data bus, whether it serves the check of broken light bulbs, or whether the car's programming is necessary for its proper functionality, is evident from its parameters (CAN-Bus, Check Control, Coding...). Standard connections also disconnect the original parking sensors in most cases (see PDC Disconnection parameter).
Assembly time varies between 60-90 minutes.
Manufacturer: AC, Poland
Standard electrical connections are normally plugged into pre-prepared connectors on the vehicle and, after coding, communicate with the vehicle's electronic systems. Whether the connection communicates via the data bus, whether it serves the check of broken light bulbs, or whether the car's programming is necessary for its proper functionality, is evident from its parameters (CAN-Bus, Check Control, Coding...). Standard connections also disconnect the original parking sensors in most cases (see PDC Disconnection parameter).
Assembly time varies between 60-90 minutes.
Manufacturer: AC, Poland
| Also for vehicles |
preparation
|
|---|---|
| Number of pins |
7
|
| Requires encoding |
Yes, encryption is required
|
| Wiring |
At the rear of the vehicle
|
| LED compatible |
Yes
|
| PDC disconnection |
Yes, automatically disconnects the original PDC
|