Typical electrical installation Toyota Yaris Cross 2021- , 13pin, AC
- 10 %
Product Description
Typical 13-pin electrical set of the manufacturer AC / trail-tec with an unbeatable price and perfect reliability.
Standard electrical connections are normally plugged into pre-prepared connectors on the vehicle and, after coding, communicate with the vehicle's electronic systems. The parameters (CAN-Bus, Check Control, Coding, etc.) show whether the connection communicates via the data bus, whether it controls the check of broken light bulbs, or whether the vehicle needs to be programmed for its proper functionality. Standard connections also disconnect the original parking sensors in most cases (see PDC Disconnection parameter).
Assembly time varies between 60-90 minutes.
Manufacturer: AC, Poland
Standard electrical connections are normally plugged into pre-prepared connectors on the vehicle and, after coding, communicate with the vehicle's electronic systems. The parameters (CAN-Bus, Check Control, Coding, etc.) show whether the connection communicates via the data bus, whether it controls the check of broken light bulbs, or whether the vehicle needs to be programmed for its proper functionality. Standard connections also disconnect the original parking sensors in most cases (see PDC Disconnection parameter).
Assembly time varies between 60-90 minutes.
Manufacturer: AC, Poland
Number of pins |
13
|
---|---|
Requires encoding |
No, encryption is not necessary
|
Wiring |
At the rear of the vehicle
|
LED compatible |
Yes
|
PDC disconnection |
Manual disconnection of PDC by push button
|